GTI-VR6

Old Library

The information here is no longer maintained.

Please go to our NEW LIBRARY where we have imported this page and added more.

[GTI-VR6 Library] [GTI-VR6 Mailing List]     

Aftermarket spark plug wires (ignition wires, ignition cables): Blue Ignitors

Table of Contents
Need info on Ignition wires Tory <tory@mac> Thu, 16 May 2002 10:15:35 -0500
Re: [gti-vr6] Need info on Ignition wires "Bob Tillman" <bobt@p-vector> Thu, 16 May 2002 12:09:05 -0400



From
From: Tory <tory@mac>
To: <list@gti-vr6>
Subject: Need info on Ignition wires
Date: Thu, 16 May 2002 10:15:35 -0500
 
I think it¹s time to replace my Œ97¹s wires.  I saw some discussion on
Magnecor and there seems to be 3-4 different aftermarket wire sets.  What
have been people¹s experience with some of these?  Thanks in advance for any
input you can give me.

Tory 



From
From: "Bob Tillman" <bobt@p-vector>
To: "Tory" <tory@mac>, <list@gti-vr6>
Subject: Re: [gti-vr6] Need info on Ignition wires
Date: Thu, 16 May 2002 12:09:05 -0400
 
Hi Tory -

We've been very happy with the Rapid Blue Ignitors, in both my '96 and
Sondra's '98.  They're $84.95 from http://www.rapidparts.com and will fit in
the stock wiring loom without trimming the tabs.  They use nice silicone
insulation and VW-spec Beru connectors.

I believe they're part number 028-9008 on this page:
http://www.rapidparts.com/Pages/vwc003sv.html

Good luck!
- Bob T.

Subject: 
         RE: [gti-vr6] Need info on Ignition wires
    Date: 
         Thu, 16 May 2002 13:19:35 -0400
   From: 
         "Gavin G. Dennis" &lt;&#103;dennis&#64;bpg-online<img src=/i/dc.gif border=0 width=35 height=15>&gt;
      To: 
         &lt;&#108;ist&#64;gti-vr6<img src=/i/dn.gif border=0 width=35 height=15>&gt;



I have 0 complaints with the factory wires.  The original set had a
flaw or something and i replaced them with factory ones and they have
been fine since.  $100 IIRC.

Gavin



©1995-2015 gti-vr6.net -- All Rights Reservered